itel 51.2V 628Ah Heavy-Duty LiFePO4 Lithium Battery IPL-51628

itel 51.2V 628Ah Heavy-Duty LiFePO4 Lithium Battery IPL-51628

itel 51.2V 628Ah Heavy-Duty LiFePO4 Lithium Battery IPL-51628 a high-capacity energy storage solution for installations that require more stored electricity than a conventional residential battery can provide.

With a nominal voltage of 51.2V and a capacity of 628Ah, this battery delivers approximately 32kWh of nominal energy. Its Lithium Iron Phosphate (LiFePO₄) chemistry and intelligent battery management system make it suitable for appropriately configured solar and backup-power systems where safety monitoring, storage capacity and long-term operation are important.

The IPL-51628 is particularly relevant for larger homes, hotels, offices, healthcare facilities and commercial premises with substantial energy demands. It can store electricity generated by compatible solar panels or supplied through a suitable charging system, allowing stored energy to be used when solar production falls or the public electricity supply is interrupted.

Key Features and Benefits

• 32kWh nominal energy capacity: Provides a substantial stored-energy reserve for larger solar installations.
• 51.2V, 628Ah configuration: Combines high battery capacity with a 48V-class system platform.
• LiFePO₄ battery chemistry: Uses Lithium Iron Phosphate technology for rechargeable energy storage.
• Long cycle-life rating: The IPL-51628H listing specifies more than 8,000 cycles under stated laboratory conditions; confirm the rating for the exact model supplied.
• Intelligent BMS: Helps monitor battery operation and provides electrical and temperature-related protection.
• CAN and RS485 communication: Enables data exchange with compatible inverter systems.
• Parallel expansion: Multiple approved units can be combined for larger storage installations, subject to manufacturer limits.
• High-current capability: Published IPL-51628H specifications list a maximum continuous discharge current of 300A.
• Natural cooling: Uses passive cooling rather than a dedicated cooling fan.
• Floor-standing metal cabinet: Designed for a suitable, properly prepared installation area.
• Integrated status indicators: LED indicators communicate battery charge and operating status.

Typical Appliance Runtime Estimates (Single 32.15kWh Module)

A single IPL-51628 (32.15kWh) module supports severe residential, commercial, or industrial loads:

• 4x 1.5HP / 2HP Inverter Air Conditioners (2400W avg load): ~11 to 12.5 Hours
• Walk-in Cooler / Multiple Freezers (800W combined): ~35 to 38 Hours
• Multiple Smart TVs + Decoders + Audio Setup (350W total): ~80+ Hours
• Entire Office Complex: 20x Laptops + Servers + Network Racks (1000W total): ~28 to 30 Hours
• 15x Standing / Ceiling Fans (600W total): ~45 to 48 Hours
• Building-Wide LED Lighting Network (400W total): ~70+ Hours